The performance characteristics.

The indirect heating method produces hot air, which makes the air in the oven separate from the combustion chamber air, ensuring the cleaning of the circulating hot air and avoiding the pollution of the workpiece in the oven.

In order to achieve good heat transfer efficiency, inside (outside) the heat exchanger adopts the three pass design, first the return for the corrugated furnace combustion chamber, second return pipe points are arranged at both sides of the heat exchanger, the third heat exchanger is arranged on the return above, so that the heat transfer efficiency can reach above 65%;

large capacity hot air forced convection circulation, high heat exchange efficiency, drying room temperature uniformity;

A light diesel oil, kerosene, natural gas, city gas for the imported burner performance of fuel burner automatic control system is reliable, advanced controller configuration and monitoring system, hair dryer, pre combustion ignition, flame monitoring, accident handling instructions are automatically completed, one step did not reach normal, automatically stop burning.

Long distance or close range automatic heating control system, easy to operate, easy to centralized or separate management;

According to the requirement of the temperature uniformity of the oven, the burner can be divided into one stage, two stage and proportional control.

According to the transportation and site conditions, the structure of the oven is divided into three types, which are divided into the whole, the split type and the block combination, for the user to choose.

Compared with the electric heating oven, the operating cost of the fuel gas oven is low.

The main technical parameters:

Workshop size (wide x depth * high): 2000 x 2000 x 2000 (minimum)

Working voltage: 3-380V

Power frequency: 50HZ

Temperature uniformity: + 4 C

Fuel quantity: 3-8Kg/h

Motor power: 2.2KW

Heat transfer efficiency: 65%

Vehicle load: 4T